prod_env.ini.example

[platformio]
default_envs =
  esp32dev-ble-1
  esp32dev-ble-2
  env:nodemcuv2-ONOFFPILIGHT

;esp32 1
[env:esp32dev-ble-1]
platform = ${com.esp32_platform}
platform_packages = ${com.esp32_platform_packages}
board = esp32dev
board_build.partitions = min_spiffs.csv
lib_deps =
  ${com-esp.lib_deps}
  ${libraries.ble}
build_flags =
  ${com-esp.build_flags}
  '-DZgatewayBT="BT"'
  '-DGateway_Name="OpenMQTTGateway_ESP32_1"'
upload_protocol = espota
upload_port = 192.168.1.82
upload_flags =
  --auth=OTAPASSWORD
upload_speed = 512000
monitor_speed = 115200

;esp32 2
[env:esp32dev-ble-2]
platform = ${com.esp32_platform}
platform_packages = ${com.esp32_platform_packages}
board = esp32dev
board_build.partitions = min_spiffs.csv
lib_deps =
  ${com-esp.lib_deps}
  ${libraries.ble}
build_flags =
  ${com-esp.build_flags}
  '-DZgatewayBT="BT"'
  '-DGateway_Name="OpenMQTTGateway_ESP32_2"'
  ;-DCORE_DEBUG_LEVEL=4
upload_protocol = espota
upload_port = 192.168.1.111
upload_flags =
  --auth=OTAPASSWORD
upload_speed = 512000
monitor_speed = 115200

[env:nodemcuv2-ONOFFPILIGHT]
platform = ${com.esp8266_platform}
board = nodemcuv2
lib_deps =
  ${com-esp.lib_deps}
  ${libraries.esppilight}
  ${libraries.esp8266_mdns}
  ${libraries.wire}
build_flags =
  ${com-esp.build_flags}
  '-DZgatewayPilight="Pilight"'
  '-DZactuatorONOFF="ONOFF"'
  '-DGateway_Name="OpenMQTTGateway_ESP8266_ONOFFRF"'
board_build.flash_mode = dout

[env:esp32-lolin32lite-ble-lp]
platform = ${com.esp32_platform}
platform_packages = ${com.esp32_platform_packages}
board = lolin32
board_build.partitions = min_spiffs.csv
lib_deps =
  ${com-esp.lib_deps}
  ${libraries.ble}
build_flags =
  ${com-esp.build_flags}
  '-DZgatewayBT="BT"'
  '-DLED_RECEIVE=22'
  '-DLED_RECEIVE_ON=0'
  '-DGateway_Name="OpenMQTTGateway_LOLIN32LITE_LP"'
  '-DESPWifiManualSetup=true'
  '-Dwifi_ssid="MyWiFiAP"'
  '-Dwifi_password="MyWiFiAPPassword"'
  '-DMQTT_USER="lolin-esp32"'
  '-DMQTT_PASS="abcdefghi"'
  '-DMQTT_SERVER="192.168.1.17"'
  '-DDEFAULT_LOW_POWER_MODE=INTERVAL'

;hacked Sonoff RF-Bridge
[env:sonoff-rfbridge-hacked]
platform = ${com.esp8266_platform}
board = esp8285
lib_deps =
	${com-esp.lib_deps}
	${libraries.esppilight}
build_flags =
	${com-esp.build_flags}
	'-DZgatewayPilight="Pilight"'
	'-DRF_RECEIVER_GPIO=4'
	'-DRF_EMITTER_GPIO=5'
	'-DLED_INFO=13'
	'-DLED_INFO_ON=0'
	'-DZsensorGPIOInput="GPIOInput"'
	'-DINPUT_GPIO=0'
	'-DGateway_Name="OpenMQTTGateway_SRFB_Direct"'
board_build.flash_mode = dout
board_build.ldscript = eagle.flash.1m64.ld ;this frees more space for firmware uplad via OTA.

;hacked Sonoff RF-Bridge OTA flash
[env:sonoff-rfbridge-hacked-ota]
upload_protocol = espota
upload_port = <ip> ;change this to the IP address of you SRFB
upload_speed = 512000
upload_flags =
    --auth=OTAPASSWORD
    --port=8266
platform = ${com.esp8266_platform}
board = esp8285
lib_deps =
	${com-esp.lib_deps}
	${libraries.esppilight}
build_flags =
	${com-esp.build_flags}
	'-DZgatewayPilight="Pilight"'
	'-DRF_RECEIVER_GPIO=4'
	'-DRF_EMITTER_GPIO=5'
	'-DLED_INFO=13'
	'-DLED_INFO_ON=0'
	'-DZsensorGPIOInput="GPIOInput"'
	'-DINPUT_GPIO=0'
	'-DGateway_Name="OpenMQTTGateway_SRFB_Direct"'
board_build.flash_mode = dout
extra_scripts = scripts/compressFirmware.py
board_build.ldscript = eagle.flash.1m64.ld ;this frees more space for firmware uplad. Should also be uses for initial flash via serial

;Wemos D1 with an MQ2 flammable gas sensor at custom interval
[env:wemosd1-mq2-gas]
platform = ${com.esp8266_platform}
board = d1_mini
lib_deps =
  ${com-esp.lib_deps}
  ${libraries.wifimanager8266}
  ${libraries.esp8266_mdns}
build_flags =
  ${com-esp.build_flags}
  '-UZmqttDiscovery'          ; disables MQTT Discovery
;  '-UZmqttDiscovery="HADiscovery"'
  '-DvalueAsATopic=true'       ; MQTT topic includes model and device
  '-DGateway_Name="OpenMQTTGateway_MQ2_GAS"'
  '-DZsensorMQ2="MQ2"'
  '-DTimeBetweenReadingmq2=8000'
board_build.flash_mode = dout
custom_description = Gas flammable sensor gateway
custom_hardware = Gas flammable sensor first version

; Wemos Lolin D1 mini with CC1101 RF module and manual network configuration
[env:d1mini-rf-cc1101]
platform = ${com.esp8266_platform}
board = d1_mini
lib_deps =
  ${com-esp.lib_deps}
  ${libraries.wifimanager8266}
  ${libraries.rc-switch}
  ${libraries.smartrc-cc1101-driver-lib}
  ${libraries.esp8266_mdns}
build_flags =
  ${com-esp.build_flags}
  '-DZgatewayRF="RF"'
  '-DZradioCC1101="CC1101"'
  '-DGateway_Name="OMG_D1MINI_RF"'
  ;; manual network config could be required due to
  ;; the dhcp incompatibilities with the newer wifi routers
  ; '-DNetworkAdvancedSetup=true'
  ; '-DNET_IP="192.168.1.99"'
  ; '-DNET_MASK="255.255.255.0"'
  ; '-DNET_GW="192.168.1.1"'
  ; '-DNET_DNS="1.1.1.1"'
  '-DLED_RECEIVE=LED_BUILTIN'
  '-DLED_RECEIVE_ON=LOW'
  '-DRF_RECEIVER_GPIO=4'
  '-DRF_EMITTER_GPIO=5'
  ;; Assign erase/reset button
  ; '-DTRIGGER_GPIO=0'

;ESP12E with an DS1820 waterproof temperature probe, custom interval, max temperature resolution and DEEP SLEEP to conserve battery power
[env:esp12e-ds18b20-deepsleep-pool]
platform = ${com.esp8266_platform}
board = esp12e
lib_deps =
  ${com-esp.lib_deps}
  ${libraries.wifimanager8266}
  ${libraries.esp8266_mdns}
  ${libraries.dallastemperature}
build_flags =
  ${com-esp.build_flags}
  '-UZmqttDiscovery'          ; disables MQTT Discovery
;  '-UZmqttDiscovery="HADiscovery"'
  '-DvalueAsATopic=true'       ; MQTT topic includes model and device
  '-DGateway_Name="OpenMQTTGatewayDS1820Pool"'
  '-DZsensorDS1820="DS1820"'
  '-DDS1820_OWBUS_GPIO=D2'
  '-DDEEP_SLEEP_IN_US=120000000'
  '-DDS1820_RESOLUTION=12'
  '-DDS1820_INTERVAL_SEC=15UL'
board_build.flash_mode = dout
custom_description = Pool temp sensor gateway
custom_hardware = Pool temp sensor first version

[env:wemos-d1-uno32-HM-RD-deepsleep-waterleak] ;C-37, YL-83, HM-RD leak detector powered by battery using ESP32 Deepsleep and EXT0 wake by sensor state
platform = ${com.esp32_platform}
platform_packages = ${com.esp32_platform_packages}
board = wemos_d1_uno32
board_build.partitions = min_spiffs.csv
lib_deps =
  ${com-esp.lib_deps}
  ${libraries.wifimanager32}
build_flags =
  ${com-esp.build_flags}
  '-UZmqttDiscovery'              ; disables MQTT Discovery
;  '-UZmqttDiscovery="HADiscovery"'
  '-DvalueAsATopic=true'          ; MQTT topic includes model and device
  '-DGateway_Name="OpenMQTTGatewayMHRDWaterLeak"'
  '-DZsensorC37_YL83_HMRD="HMRD"' ;Which type of sensor
  '-DC37_YL83_HMRD_Digital_GPIO=GPIO_NUM_14'
  '-DC37_YL83_HMRD_Analog_GPIO=GPIO_NUM_35'
  '-DC37_YL83_HMRD_Analog_RESOLUTION=12'
  '-DC37_YL83_HMRD_INTERVAL_SEC=3000'
  '-DDEEP_SLEEP_IN_US=120000000' ; Deep sleep for a period of time to conserve battery
  '-DESP32_EXT0_WAKE_PIN=C37_YL83_HMRD_Digital_GPIO' ;Should a leak be detected immediatly wake the ESP32 and report the problem
  '-DESP32_EXT0_WAKE_PIN_STATE=0' ;Should water/leak be detected immediatly wake the ESP32 and report the problem, sensor state to look for wakeup
board_build.flash_mode = dout
custom_description = Water/Leak sensor gateway
custom_hardware = Water/Leak sensor first version
monitor_speed = 115200