Add Waveshare ESP32-S3-Touch-LCD-1.69

_board/waveshare_esp32_s3_touch_lcd_1_69.md

@@ -0,0 +1,36 @@
+---
+layout: download
+board_id: "waveshare_esp32_s3_touch_lcd_1_69"
+title: "ESP32-S3-Touch-LCD-1.69 Download"
+name: "ESP32-S3-Touch-LCD-1.69"
+manufacturer: "Waveshare"
+board_url:
+ - "https://www.waveshare.com/esp32-s3-touch-lcd-1.69.htm"
+board_image: "waveshare_esp32_s3_touch_lcd_1_69.jpg"
+date_added: 2026-10-08
+family: esp32s3
+features:
+  - USB-C
+  - Battery Charging
+  - Display
+  - Wi-Fi
+  - Bluetooth/BTLE
+---
+
+The ESP32-S3-Touch-LCD-1.69 is a watch-sized development board built on the ESP32-S3 (dual-core Xtensa LX7 at 240 MHz, 8 MB PSRAM, 16 MB flash) with a 1.69 inch 240×280 IPS touch display, 2.4 GHz Wi-Fi and Bluetooth 5 LE.
+
+**Technical details**
+
+ - ESP32-S3 with 8 MB octal PSRAM and 16 MB flash, onboard antenna
+ - 1.69 inch IPS display, 240×280, ST7789V2 controller over SPI, PWM backlight
+ - CST816T capacitive touch with gesture support (I2C)
+ - QMI8658C 6-axis IMU and PCF85063A RTC with an RTC battery header (I2C)
+ - ETA6098 lithium battery charger, MX1.25 battery connector, battery voltage sense
+ - Passive buzzer, BOOT and RST buttons, and a PWR key with a power-hold circuit for battery operation
+ - USB-C (native USB: CircuitPython REPL and CIRCUITPY drive)
+
+In CircuitPython, `board.DISPLAY` is ready at boot, the touch controller, IMU and RTC share `board.I2C()`, and the power-hold line is asserted automatically so the board runs from its battery; `board.PWR_BUTTON` reads the key.
+
+## Purchase
+
+* [Waveshare](https://www.waveshare.com/esp32-s3-touch-lcd-1.69.htm)