Update to v6.6.155 - #371
Open
DaftB0t wants to merge 238 commits into
Open
Conversation
[ Upstream commit 26cb8ebbfaf713c82e142d08828d4d765057633b ] disk_release() undoes blk_mq_init_allocated_queue() for a disk whose probe failed before add_disk(), but it only calls blk_mq_exit_queue(). Nothing there stops q->timeout, and that timer rolls forward: it stays pending until it next expires, not until the last request completes. So if the driver issued any I/O before adding the disk, the request_queue is freed while still linked into a timer wheel bucket. Commit 6f8191f ("block: simplify disk shutdown") dropped the blk_cleanup_queue() call that used to stop it. __del_gendisk() and blk_mq_destroy_queue() still do; only the probe failure path lost it. nvme gets there because nvme_update_ns_info() submits Report Zones or FDP io-mgmt-recv on ns->queue before the disk is added, so a later failure - a concurrent reset setting NVME_CTRL_FROZEN, or device_add_disk() failing - lands in put_disk() with the timer armed: BUG: KASAN: slab-use-after-free in detach_if_pending+0x30c/0x340 Write of size 8 at addr ffff888004d71310 by task kworker/u8:2/37 __timer_delete_sync+0x156/0x240 kernel/time/timer.c:1621 blk_sync_queue+0x22/0x40 block/blk-core.c:222 nvme_sync_queues+0x100/0x150 drivers/nvme/host/core.c:5362 nvme_reset_work+0x138/0x930 drivers/nvme/host/pci.c:3264 Allocated by task 34: __blk_mq_alloc_disk+0x33/0x100 block/blk-mq.c:4462 nvme_alloc_ns+0x290/0x3870 drivers/nvme/host/core.c:4146 Freed by task 0: blk_free_queue_rcu+0x3a/0x50 block/blk-core.c:254 rcu_core+0xc10/0x1730 kernel/rcu/tree.c:2857 The queue being synced there is ctrl->admin_q, only a victim sharing a timer wheel bucket with the freed queue's dangling entry; other runs tripped in enqueue_timer(), __run_timers() or blk_mq_timeout_work(). Failing nvme_alloc_ns() with a debug patch makes it deterministic: one leaked timer trips KASAN within seconds, while 1987 patched releases produced no splat. Stop the timer and the queue work items before blk_mq_exit_queue(), like blk_mq_destroy_queue() does. Found by FuzzNvme. Fixes: 6f8191f ("block: simplify disk shutdown") Acked-by: Weidong Zhu <weizhu@fiu.edu> Signed-off-by: Chao Shi <coshi036@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://patch.msgid.link/20260727201257.211635-1-coshi036@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
commit edf7e90 upstream. As JY reported in bugzilla [1], Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 pc : [0xffffffe51d249484] f2fs_is_cp_guaranteed+0x70/0x98 lr : [0xffffffe51d24adbc] f2fs_merge_page_bio+0x520/0x6d4 CPU: 3 UID: 0 PID: 6790 Comm: kworker/u16:3 Tainted: P B W OE 6.12.30-android16-5-maybe-dirty-4k #1 5f7701c9cbf727d1eebe77c89bbbeb3371e895e5 Tainted: [P]=PROPRIETARY_MODULE, [B]=BAD_PAGE, [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Workqueue: writeback wb_workfn (flush-254:49) Call trace: f2fs_is_cp_guaranteed+0x70/0x98 f2fs_inplace_write_data+0x174/0x2f4 f2fs_do_write_data_page+0x214/0x81c f2fs_write_single_data_page+0x28c/0x764 f2fs_write_data_pages+0x78c/0xce4 do_writepages+0xe8/0x2fc __writeback_single_inode+0x4c/0x4b4 writeback_sb_inodes+0x314/0x540 __writeback_inodes_wb+0xa4/0xf4 wb_writeback+0x160/0x448 wb_workfn+0x2f0/0x5dc process_scheduled_works+0x1c8/0x458 worker_thread+0x334/0x3f0 kthread+0x118/0x1ac ret_from_fork+0x10/0x20 [1] https://bugzilla.kernel.org/show_bug.cgi?id=220575 The panic was caused by UAF issue w/ below race condition: kworker - writepages - f2fs_write_cache_pages - f2fs_write_single_data_page - f2fs_do_write_data_page - f2fs_inplace_write_data - f2fs_merge_page_bio - add_inu_page : cache page #1 into bio & cache bio in io->bio_list - f2fs_write_single_data_page - f2fs_do_write_data_page - f2fs_inplace_write_data - f2fs_merge_page_bio - add_inu_page : cache page #2 into bio which is linked in io->bio_list write - f2fs_write_begin : write page #1 - f2fs_folio_wait_writeback - f2fs_submit_merged_ipu_write - f2fs_submit_write_bio : submit bio which inclues page #1 and #2 software IRQ - f2fs_write_end_io - fscrypt_free_bounce_page : freed bounced page which belongs to page #2 - inc_page_count( , WB_DATA_TYPE(data_folio), false) : data_folio points to fio->encrypted_page the bounced page can be freed before accessing it in f2fs_is_cp_guarantee() It can reproduce w/ below testcase: Run below script in shell #1: for ((i=1;i>0;i++)) do xfs_io -f /mnt/f2fs/enc/file \ -c "pwrite 0 32k" -c "fdatasync" Run below script in shell #2: for ((i=1;i>0;i++)) do xfs_io -f /mnt/f2fs/enc/file \ -c "pwrite 0 32k" -c "fdatasync" So, in f2fs_merge_page_bio(), let's avoid using fio->encrypted_page after commit page into internal ipu cache. Fixes: 0b20fce ("f2fs: cache global IPU bio") Reported-by: JY <JY.Ho@mediatek.com> Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> [Jiucheng Xu: backport to 6.6.y] Signed-off-by: Jiucheng Xu <jiucheng.xu@amlogic.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
commit cdcc4e46180df8161f4d2f3c6fd6beaf6990133d upstream. IPVS configuration paths update destination availability while connection accounting updates destination overload state. The two independent states share dest->flags, so their read-modify-write updates can race and lose one another. Keep OVERLOAD in flags, where the preceding patch serializes its updates with dst_lock, and move AVAILABLE to cflags. This keeps configuration- controlled availability out of the scheduler hot cacheline until a scheduler needs to check it. It also prevents availability updates from clobbering overload state. The destination status bits are not exposed through the IPVS sockopt or netlink interfaces, so keep their definitions in the internal IPVS header. Readers can still observe stale destination state; this does not provide a cross-field snapshot. Fixes: 1da177e ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Reported-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn> Reported-by: Yuxiang Yang <yangyx22@mails.tsinghua.edu.cn> Reported-by: Ao Wang <wangao@seu.edu.cn> Reported-by: Xuewei Feng <fengxw06@126.com> Reported-by: Qi Li <qli01@tsinghua.edu.cn> Reported-by: Ke Xu <xuke@tsinghua.edu.cn> Link: https://lore.kernel.org/all/8913381c-1e02-35c7-0ec4-61de5a12fd35@ssi.bg/ Assisted-by: Claude-Code:GLM-5.2 Suggested-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> (cherry picked from commit cdcc4e46180df8161f4d2f3c6fd6beaf6990133d) [ Julian: Backport by removing the hunks from ip_vs_xmit.c ] Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 65267c9c4f28199985505977bc2c628c82fc50ef ] In mana_remove(), when a NULL port is encountered in the port iteration loop, 'goto out' skips the mana_destroy_eq(ac) call, leaking the event queues allocated earlier by mana_create_eq(). This can happen when mana_probe_port() fails for port 0, leaving ac->ports[0] as NULL. On driver unload or error cleanup, mana_remove() hits the NULL entry and jumps past mana_destroy_eq(). Change 'goto out' to 'break' so the for-loop exits normally and mana_destroy_eq() is always reached. Remove the now-unreferenced out: label. Fixes: 1e2d082 ("net: mana: Add support for EQ sharing") Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com> Link: https://patch.msgid.link/20260420124741.1056179-6-ernis@linux.microsoft.com Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> [ hmahfooz: resolve conflict in mana_remove() due to missing commit 3b194343c250 ("net: mana: Implement ndo_tx_timeout and serialize queue resets per port.") ] Signed-off-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a93d37a09b863810653f93d371fb197457d59deb upstream. p_bools.nprim comes from the policy image independently of how many booleans follow it, and cond_index_bool() fills bool_val_to_struct[] at value - 1, so a count larger than the values present leaves NULL entries. Every user of that array then walks it by index and dereferences each entry: cond_evaluate_expr() on the access-vector path, security_get_bools() and security_get_bool_value() behind selinuxfs, and security_set_bools(). A sparse class value is absorbed by policydb_class_isvalid() and its siblings; booleans have no such predicate, and no consumer that could use one. Reject a boolean value that no boolean defines, once, where the array is built. Conforming policies define every boolean they declare and are unaffected. Cc: stable@vger.kernel.org Fixes: 1da177e ("Linux-2.6.12-rc2") Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me> Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9a82dcd98b6e6e11cfd162410967951f12152528 upstream. security_get_permissions() maps an inherited common's permissions into an array sized by the class's own permissions.nprim, but class_read() takes that nprim verbatim from the policy image and never checks that it covers the common. A class that inherits a common of N permissions while declaring a smaller nprim is accepted, and on load the common's permissions are written past the class-sized array -- an out-of-bounds heap write. Reject a class whose permission count is below its inherited common's. Well-formed policies, where the class count already includes the inherited permissions, are unaffected. Cc: stable@vger.kernel.org Fixes: 55fcf09 ("selinux: add support for querying object classes and permissions from the running policy") Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me> Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e5c0235a3c4e9eb047a16cd02323fe4ecf2f570e upstream. sel_write_load() calls selinux_policy_cancel() when sel_make_policy_nodes() fails, and that helper dereferences the outgoing policy to cancel its sidtab conversion. On the first policy load there is no outgoing policy: security_load_policy() returns early for that case, before it converts anything, and state->policy is still NULL. A first load that fails while building the selinuxfs tree therefore takes a NULL dereference in selinux_policy_cancel(), reached from a write(2) to /sys/fs/selinux/load. Skip the cancel when there is no old policy, mirroring the check security_load_policy() already makes before it converts. Cc: stable@vger.kernel.org Fixes: 02a52c5 ("selinux: move policy commit after updating selinuxfs") Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me> Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 22b05fec62c0fe9864cfceb52f7d0f3a34d9b1dd upstream. security_get_classes() sizes an array by p_classes.nprim and fills it at value - 1, so a class value the policy never defines leaves a NULL. sel_make_classes() passes every entry to sel_make_dir(), reaching the same d_alloc_name() dereference as the permission array. The class symbol table is allowed to be sparse (policydb_class_isvalid() exists to absorb that), but this getter builds its own array straight from the hash table and has no such predicate. Fail the lookup when a value went unclaimed instead of handing out the NULL. Conforming policies define every class they declare and are unaffected. Cc: stable@vger.kernel.org Fixes: 55fcf09 ("selinux: add support for querying object classes and permissions from the running policy") Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me> Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ca318e7bbb7723f57bcd9e69a2873b5884435552 upstream. check_transfer() compares the input and output files byte-by-byte using `cmp -l "$in" "$out" | while read ...`. Because the while-loop body runs in a subshell (the script sets neither lastpipe nor pipefail), the fail_test call inside it -- which sets the global ret/last_test_failed -- and the `return 1` both act on the subshell, not on check_transfer(). check_transfer() thus always falls through to `return 0`, and any data corruption affecting only the payload (leaving the subflow/PM counters untouched) is silently reported as PASS. Fixes: 8117dac ("selftests: mptcp: add invert check in check_transfer") Cc: stable@vger.kernel.org Signed-off-by: Gang Yan <yangang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260803-net-mptcp-misc-fixes-7-2-rc6-v2-5-b8f496d71664@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b6ee361524641f57b2e2363f7737f20e17f67827 upstream. Some MPTCP suboptions are mutually exclusive according to the RFC8684, but also because in different places, the code doesn't expect some combinations to be present. That's specially true for suboptions that would be present twice, but with different attributes. The new restrictions are the same as the ones applied on the output side, with mptcp_write_options. The same rules can be reused with a small fix: an MP_FASTCLOSE can be used with a DSS when the sender picks this option [1], which is not the case on Linux. Here are the rules: Which options can be used together? X: mutually exclusive O: often used together C: can be used together in some cases P: could be used together but we prefer not to (optimisations) | Opt: | MPC | MPJ | DSS | ADD | RM | PRIO | FAIL | FC | |------|------|------|------|------|------|------|------|------| | MPC |------|------|------|------|------|------|------|------| | MPJ | X |------|------|------|------|------|------|------| | DSS | X | X |------|------|------|------|------|------| | ADD | X | X | P |------|------|------|------|------| | RM | C | C | C | P |------|------|------|------| | PRIO | X | C | C | C | C |------|------|------| | FAIL | X | X | C | X | X | X |------|------| | FC | X | X | P | X | X | X | X |------| | RST | X | X | X | X | X | X | O | O | |------|------|------|------|------|------|------|------|------| The only difference is with the 'P': another stack could send and ADD_ADDR with other suboptions (DSS, RM_ADDR), and this should be allowed. A few points of attention: - In theory, an MP_CAPABLE could be used with a RM_ADDR, but there is no reason to add it with a SYN. Note that even with a 4th ACK, it doesn't seem to be useful, except when IDs are known in advance via another channel. Better not to break that. - Now, combining both an MP_CAPABLE and an MP_JOIN will no longer result to a reject of the two options, but only the second suboption is ignored. That seems OK to do that for this unexpected error. At least now all inconsistent combinations are handled the same way. This could change later in next. This also means the explicit checks for having both MPC + MPJ in subflow.c will now be unreachable. That's fine, they will be removed in a follow-up patch. - In case of conflicting combinations, the extra suboption(s) is/are ignored: having such combinations either means the remote peer is buggy, or is evil. The simplest action is then taken in this case: stop processing the current suboption. - In mp_opt->suboptions, there is also a bit reserved to the checksum, which can be used in an MP_CAPABLE and a DSS. Each time a DSS option can be used in parallel with another option, the checksum can be set, so the verification is combined into a new OPTIONS_MPTCP_DSS macro. - An MP_CAPABLE ACK can carry a Data-Level Length, and an optional Checksum: they are the same as the ones found in a DSS, because a DSS cannot be used in parallel to an MP_CAPABLE. Similarly, even if there is room, a DSS cannot be used with an MP_JOIN. Fixes: eda7acd ("mptcp: Handle MPTCP TCP options") Cc: stable@vger.kernel.org Link: https://www.rfc-editor.org/rfc/rfc8684.html#section-3.5-5.1 [1] Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260803-net-mptcp-misc-fixes-7-2-rc6-v2-2-b8f496d71664@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 35772b4981f38ba8059372cde8753e8e477e98ec upstream. A remote peer could send a malformed DSS with a wrong size, followed by another DSS or MPC + Data. In this case, the first suboption will be ignored, but leaving some fields written, which could lead to inconsistency or access uninitialized data. Explicitly reset the fields that could have been modified in case of unexpected size. Link: https://netdev-ai.bots.linux.dev/sashiko/#/patchset/20260728-net-mptcp-misc-fixes-7-2-rc6-v1-0-f7e2d229159d%40kernel.org?part=1 Fixes: 648ef4b ("mptcp: Implement MPTCP receive path") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260803-net-mptcp-misc-fixes-7-2-rc6-v2-1-b8f496d71664@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e00b63056fb4f261455b3e5df5268a1f8ce47a87 upstream. Passive TCP Fast Open accepts a valid-cookie SYN even when it carries no data. In that case the child socket's receive queue is intentionally left empty. mptcp_fastopen_subflow_synack_set_params() set is_mptfo before checking for queued SYN data. That made data-less TFO SYNs hit a WARN and, if the warning was non-fatal, left stale MPTFO state behind. The stale flag could later trigger a state-confusion bug in check_fully_established(). Only mark the subflow as MPTFO after confirming that an SKB was queued. Return quietly when the receive queue is empty. Note that mptcp_subflow_context's is_mptfo field is now not just about subflows where the TFO was present, but about MPTFO subflow that consumed SYN data. Only having a valid cookie but not carrying data is not really "doing TFO". Fixes: 36b122b ("mptcp: add subflow_v(4,6)_send_synack()") Cc: stable@vger.kernel.org Reported-by: Yuan Tan <yuantan098@gmail.com> Reported-by: Yifan Wu <yifanwucs@gmail.com> Reported-by: Juefei Pu <tomapufckgml@gmail.com> Reported-by: Zhengchuan Liang <zcliangcn@gmail.com> Reported-by: Xin Liu <bird@lzu.edu.cn> Signed-off-by: Wyatt Feng <bronzed_45_vested@icloud.com> Signed-off-by: Ren Wei <n05ec@lzu.edu.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260803-net-mptcp-misc-fixes-7-2-rc6-v2-7-b8f496d71664@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d141f087b1af656f055d7c5793a3e87817ba0bbe upstream.
qeth_snmp_command() and qeth_l3_arp_query() allocate a buffer sized by
a user-supplied length (udata_len) without checking a lower bound, then
set udata_offset to a fixed non-zero value and pass both to a reply
callback. The callback bounds-checks the copy with
if ((udata_len - udata_offset) < len)
Both fields are u32, so a udata_len smaller than udata_offset makes the
subtraction wrap and the check pass, and the following memcpy() writes
past the allocation. A udata_len of 0 also yields ZERO_SIZE_PTR from
kzalloc(), which the existing NULL check does not catch.
Reject buffers smaller than udata_offset before allocating, so the
callback subtraction can no longer underflow.
Fixes: 4a71df5 ("qeth: new qeth device driver")
Cc: stable@vger.kernel.org
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Hidayath Khan <hidayath@linux.ibm.com>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260730142216.218309-1-hidayath@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e780e4917d43683224812400fe3dc4816fceba75 upstream. If either tplg_ops->dai_config or widget_kcontrol_setup fail during widget setup we would double decrement the use_count of the widget because the sof_widget_free_unlocked() would be called twice, similarly the core_put would be invoked twice as well. Since the use_count and core_put() is handled within the widget_free function we need to return without falling through the pipe_widget_free label. The fixes tag is picked to the last change around this part of the code which is adequately old enough for backporting purposes. Link: thesofproject/sof#10826 Fixes: 31ed8da ("ASoC: SOF: sof-audio: Modify logic for enabling/disabling topology cores") Cc: stable@vger.kernel.org Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://patch.msgid.link/20260730085914.27546-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e4fe3e046524e5de3c04c6eef3743780cbdc231c upstream. reg_defaults must be sorted by ascending register address, as regcache_lookup_reg() locates entries in it with bsearch(). See commit fd80df3 ("regcache: Add support for sorting defaults arrays"). cs4265_reg_defaults[] lists CS4265_INT_MASK (0x0e), CS4265_STATUS_MODE_MSB (0x0f) and CS4265_STATUS_MODE_LSB (0x10) after CS4265_SPDIF_CTL1 (0x11) and CS4265_SPDIF_CTL2 (0x12), so the binary search does not find those three entries. regcache_reg_needs_sync() then cannot compare them against their default and reports that a sync is needed, so they are written to the device on every regcache_sync() even when they were never touched. Sort the table by register address. Fixes: fb6f806 ("ASoC: Add support for the CS4265 CODEC") Cc: stable@vger.kernel.org Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://patch.msgid.link/20260805082413.26174-4-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f39a68ed08bb6eef0ae711b41d645ee5e9448c09 upstream. reg_defaults must be sorted by ascending register address, as regcache_lookup_reg() locates entries in it with bsearch(). See commit fd80df3 ("regcache: Add support for sorting defaults arrays"). cs35l45_defaults[] lists the DSP1_RX*_RATE and DSP1_TX*_RATE registers (0x02b80080 - 0x02b802b8) in the middle of the table, ahead of entries with much lower addresses, so the binary search does not find 36 of its 73 entries. regcache_reg_needs_sync() then cannot compare those against their default and reports that a sync is needed, so they are written to the device on every regcache_sync() even when they were never touched. Sort the table by register address. Fixes: 74b14e2 ("ASoC: cs35l45: DSP Support") Cc: stable@vger.kernel.org Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://patch.msgid.link/20260805082413.26174-3-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d74aac116cfb2058b15df53996d23232b310f7ff upstream. reg_defaults must be sorted by ascending register address, as regcache_lookup_reg() locates entries in it with bsearch(). See commit fd80df3 ("regcache: Add support for sorting defaults arrays"). cs35l41_reg[] lists CS35L41_BSTCVRT_PEAK_CUR (0x3808) after CS35L41_BSTCVRT_COEFF (0x3810) and CS35L41_BSTCVRT_SLOPE_LBST (0x3814), so the binary search does not find those two entries. regcache_reg_needs_sync() then cannot compare them against their default and reports that a sync is needed, so they are written to the device on every regcache_sync() even when they were never touched. Sort the table by register address. Fixes: 5f2f539 ("ASoC: cs35l41: Correct handling of some registers in the cache") Cc: stable@vger.kernel.org Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://patch.msgid.link/20260805082413.26174-2-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 56f24311fd5607588a47e44675195a9efb200f29 upstream. EAR SPKR PA Gain" and the four "WSA RX* Mux" controls are enumerated, but their get and put callbacks access the value through ucontrol->value.integer.value[0] (a long) instead of ucontrol->value.enumerated.item[0] (an unsigned int). This same pattern was fixed in the sibling drivers by commit bcfe5f7 ("ASoC: codecs: rx-macro: fix accessing array out of bounds for enum type") and commit 0ea5eff ("ASoC: codecs: va-macro: fix accessing array out of bounds for enum type"), but wsa-macro was missed. On 64-bit kernels with CONFIG_SND_CTL_DEBUG this trips the elem value sanity check and every read of these controls fails with -EINVAL. Fixes: 809bcbc ("ASoC: codecs: lpass-wsa-macro: Add support to WSA Macro") Fixes: 2c4066e ("ASoC: codecs: lpass-wsa-macro: add dapm widgets and route") Assisted-by: Claude:claude-fable-5 Cc: stable@vger.kernel.org Signed-off-by: Dawid Wróbel <me@dawidwrobel.com> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com> Link: https://patch.msgid.link/20260730-worktree-lpass-tx-macro-enum-fix-v2-2-6d091c736116@dawidwrobel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 81cc73be40c6f028f1ee3f438ace46afe666dbae upstream. In fb_io_read(), if copy_to_user() performs a partial copy (e.g., due to a faulty user buffer), the loop adjusts the chunk size 'c' and updates the remaining 'count'. However, the hardware 'src' pointer has already been eagerly advanced by the original chunk size. If the loop is allowed to continue, the read will resume from an incorrect, over-advanced offset. Since the remaining 'count' was only decremented by the successful bytes, this desynchronization causes the next iterations to execute more hardware reads than originally bounded, eventually leading to out-of-bounds I/O reads. Fix this by breaking out of the loop immediately upon a partial copy_to_user(). A partial copy indicates a faulty user buffer, making subsequent read attempts futile. Breaking out ensures we return the number of successfully read bytes without risking out-of-bounds hardware accesses in subsequent mismatched iterations. Fixes: 6121cd9 ("fbdev: Move I/O read and write code into helper functions") Cc: stable@vger.kernel.org Signed-off-by: Mingyu Wang <25181214217@stu.xidian.edu.cn> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f9e5f51549000e2665e3b5e02ff876b9e09cfe95 upstream. amdgpu_pci_remove() calls drm_dev_unplug() before invoking the fini routines. After drm_dev_unplug() the drm_dev_enter() guard in amdgpu_ttm_fini() always returns false, so iounmap() for aper_base_kaddr is silently skipped. On connected_to_cpu hardware ioremap_cache() maps the aperture as WB; when iounmap() is skipped the stale WB PAT entry persists. On reload IP discovery's memremap(MEMREMAP_WC) on the same aperture range hits a WB/WC conflict, producing an ioremap error and failing re-probe. Remove the drm_dev_enter() guard and call iounmap() unconditionally. The aperture mapping is plain MMIO and does not require device-presence protection. Surprise-removal cleanup of aper_base_kaddr is already handled unconditionally by amdgpu_device_unmap_mmio(). Fixes: 62d5f9f ("drm/amdgpu: Unmap MMIO mappings when device is not unplugged") Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit fb3f68af9f6fce9343a2bd13b4d68a1c02d283df) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7d971337ebfad0b173cb46097c709db174ac3557 upstream. Add the VID/PID for the ZENAIM LEVERLESS controller to xpad_device and the VID to xpad_table. Signed-off-by: KADOTA, Kyohei <lufia@lufia.org> Link: https://patch.msgid.link/CAFMepckDUuOHiDDVVhUYc-UqJMeCqrWSfCuxbJ2x2sGgdDD4nw@mail.gmail.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 649c10bff5cb7a514bf299094833ec8c9190aac3 upstream. The checks on num_vfs in pseries_pci_sriov_enable() are ANDed where OR was apparently intended. Change it to OR. Fixes: 9a7f6b4 ("powerpc/pseries/pci: Associate PEs to VFs in configure SR-IOV") Acked-by: Nayna Jain <nayna@linux.ibm.com> Tested-by: R Nageswara Sastry <rnsastry@linux.ibm.com> Cc: stable@vger.kernel.org # 4.16 Signed-off-by: George Wilson <gcwilson@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6058f0fea10f3caf63a435677358d1b8e9325114 upstream. During F55 sensor detection, the transmitter (TX) electrode count was incorrectly assigned the value of the receiver (RX) electrode count due to copy-paste typos. This incorrect value was then propagated to the driver data and used by F54 to determine the diagnostics report size. On devices with more RX than TX electrodes, this inflated the perceived TX count, leading to incorrect report size calculations and potential out-of-bounds buffer accesses. Fix the typos by correctly assigning the TX electrode counts. Fixes: 6adba43 ("Input: synaptics-rmi4 - add support for F55 sensor tuning") Fixes: c762cc6 ("Input: synaptics-rmi4 - propagate correct number of rx and tx electrodes to F54") Reported-by: sashiko-bot@kernel.org Cc: stable@vger.kernel.org Assisted-by: Antigravity:gemini-3.5-flash Link: https://patch.msgid.link/20260626051802.4033172-1-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…acket commit 296736076b3fd078742651c719555a488624023a upstream. Make finger2 (and also finger1) unsigned, so that if the finger index in the packet is 0 then subtracting 1 creates an array index which overflows above the existing check for FOC_MAX_FINGERS, as the existing comment says it should, instead of writing to state->fingers[-1]. Fixes: 05be1d0 ("Input: psmouse - support for the FocalTech PS/2 protocol extensions") Signed-off-by: Richard Davies <richard@arachsys.com> Link: https://patch.msgid.link/20260701190932.14960-1-richard@arachsys.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 732f38c36059e68ba3b4b89c56911d777fd3185c upstream. psxpad_spi_suspend() retrieves the controller state with spi_get_drvdata(), but probe never stores it, so suspend dereferences a NULL pointer. Store it during probe. Fixes: 8be193c ("Input: add support for PlayStation 1/2 joypads connected via SPI") Signed-off-by: Linmao Li <lilinmao@kylinos.cn> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260721055551.1714965-1-lilinmao@kylinos.cn Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…oard commit 3a046db33bb9f28b43a951a7a090db771dc0f8b3 upstream. The internal keyboard of the Xiaomi Book Pro 14 does not work unless atkbd skips deactivating it at the end of atkbd_probe(). Using 'i8042.dumbkbd=1' also makes the keyboard work, but then the driver never writes to the keyboard at all, so the Caps Lock LED is lost. The atkbd_deactivate_fixup quirk fixes both without a boot parameter. DMI: XIAOMI Xiaomi Book Pro 14/TM2424, BIOS XMAPT4B0P0909 05/06/2026 Signed-off-by: Zhefu Zhang <a723356@gmail.com> Reviewed-by: Andrew Zhou <zhoulol888@gmail.com> Link: https://patch.msgid.link/20260802031559.19701-1-a723356@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5751c781d3c97ab6ce0e2a966156ed882152c415 upstream. iforce_process_packet() reads fixed fields from joystick, wheel and status packets without first checking their lengths. In particular, the shared hats-and-buttons helper unconditionally reads data[6]. The status tail is a sequence of 16-bit effect addresses, but an incomplete final address is also consumed. A successful zero-length USB URB additionally reads the packet ID before the common parser is called. Reject the zero-length USB transfer, require the seven-byte joystick and wheel prefixes and the two-byte status prefix, and consume only complete status-tail addresses. Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn> Link: https://patch.msgid.link/20260720115018.75045-1-pengpeng@iscas.ac.cn Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fb442a6673ff1046bf67754957d95880fdb394b5 upstream. In lparcfg_write(), a count of 0 results in kbuf[] being indexed at -1. Check for count == 0 in the existing check for count > sizeof(kbuf) and return -EINVAL if true. Fixes: 74422e2 ("powerpc/pseries: Remove VLA from lparcfg_write()") Acked-by: Nayna Jain <nayna@linux.ibm.com> Tested-by: R Nageswara Sastry <rnsastry@linux.ibm.com> Cc: stable@vger.kernel.org # 4.20 Signed-off-by: George Wilson <gcwilson@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dc76c3c8e8ad09362b8c1561f3928288c15cba2e upstream. In rmi_f54_work(), if an error occurs during report request or command verification, the code jumped directly to the 'error' label, bypassing the 'abort' label where f54->report_size was normally zeroed out. This left f54->report_size containing its previous successful payload size. If a user then altered the V4L2 format to a smaller size, and a subsequent run failed, rmi_f54_buffer_queue() would copy the stale, larger payload size into the shrunken V4L2 buffer, causing a heap buffer overflow. Fix this by merging the 'abort' and 'error' labels into a single 'out' exit path, and ensuring that f54->report_size is always set to 0 on failure by checking for error and zeroing the local report_size first. Fixes: 3a762db ("[media] Input: synaptics-rmi4 - add support for F54 diagnostics") Cc: stable@vger.kernel.org Reported-by: sashiko-bot@kernel.org Assisted-by: Antigravity:gemini-3.5-flash Link: https://patch.msgid.link/20260626051802.4033172-2-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…ffer
commit 49c5adc2b7d6e43c5cf033e1c86fdb9c16ababb1 upstream.
rmi_f54_work() reads a diagnostics report from the device into
f54->report_data, sizing the transfer with rmi_f54_get_report_size():
report_size = rmi_f54_get_report_size(f54);
...
for (i = 0; i < report_size; i += F54_REPORT_DATA_SIZE) {
int size = min(F54_REPORT_DATA_SIZE, report_size - i);
...
rmi_read_block(.., f54->report_data + i, size);
}
report_data is allocated once at probe from F54's own electrode counts
(array3_size(f54->num_tx_electrodes, f54->num_rx_electrodes, sizeof(u16))),
but rmi_f54_get_report_size() computes the size from
drv_data->num_*_electrodes when those are set, i.e. from the F55
function's electrode counts. Both counts come straight from device
queries (F54 and F55 each report up to 255 electrodes) and nothing
constrains the F55 counts to the F54 ones.
A malicious or malfunctioning RMI4 device that reports larger F55
electrode counts than its F54 counts makes report_size exceed the
allocation, so the read loop writes past report_data (and the V4L2
dequeue memcpy() then reads past it). On conforming hardware the F55
configured electrodes are a subset of the F54 physical electrodes, so
report_size never exceeds the buffer and well-behaved devices are
unaffected.
Record the allocation size and reject a report that does not fit,
mirroring the existing zero-size check.
Fixes: c762cc6 ("Input: synaptics-rmi4 - propagate correct number of rx and tx electrodes to F54")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Assisted-by: Antigravity:gemini-3.5-flash
Link: https://patch.msgid.link/20260626051802.4033172-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d0d48d999b0eee6bb176ef4e39d9be868fa80f7e upstream. ip6_finish_output2() caches a pointer to the IPv6 destination address (daddr) before invoking lwtunnel_xmit(). The LWT-BPF transmit path or other encapsulation operations within lwtunnel_xmit() can reallocate the skb head, freeing the memory that daddr points to. When lwtunnel_xmit() returns LWTUNNEL_XMIT_CONTINUE, the function continues to use the stale daddr pointer to compute the nexthop and to look up or create the neighbour entry. This results in a use-after-free read, which can leak sensitive kernel data, pollute the neighbour table with arbitrary values, misdirect traffic, or crash the system. Fix this by re-fetching the IPv6 header and the destination address pointer after lwtunnel_xmit() returns LWTUNNEL_XMIT_CONTINUE, ensuring that the subsequent nexthop computation and neighbour lookup operate on valid memory. Fixes: e415ed3 ("ipv6: use skb_expand_head in ip6_finish_output2") Cc: stable@vger.kernel.org Reported-by: Vega <vega@nebusec.ai> Signed-off-by: Luxiao Xu <rakukuip@gmail.com> Signed-off-by: Ren Wei <weir@nebusec.ai> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/4aa3f53bc44e79572c6dd2340ec7b68ef1a3d87d.1786516730.git.rakukuip@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3ddcfb013322aa37eaa7a0d344b73079c38dfa21 upstream. nvmet_execute_auth_receive() allocates the response buffer with kmalloc() sized by the host-supplied AUTH_RECEIVE allocation length, but the DH-HMAC-CHAP builders write only a fixed-size message into it. The full allocation length is then copied to the wire by nvmet_copy_to_sgl(), so a remote initiator receives the bytes past the built message -- up to nearly a page of uninitialized slab -- during the pre-authentication handshake. Allocate the buffer with kzalloc() so the unwritten tail is zeroed before it is sent; conforming responses are unaffected. Fixes: db1312d ("nvmet: implement basic In-Band Authentication") Cc: stable@vger.kernel.org Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ba98d6796d12258e837ece065d2ecb59d76ce4ff upstream. nvmet_fc_alloc_ls_iodlist() advances iod while initializing the LS IOD array. If an rqstbuf allocation or response buffer DMA mapping fails, the unwind loop decrements iod past the start of the array. The final kfree(iod) therefore frees an address before the allocated object. This can be reproduced with nvme-fcloop and failslab by setting fail-nth to 6 before creating a target port. KASAN reports: BUG: KASAN: invalid-free in nvmet_fc_register_targetport Free of addr ffff88816cf8ff48 by task nvmet_fail_nth/9552 Free the original allocation base stored in tgtport->iod instead. With this fix applied, the same sysfs write with fail-nth=6 returns -ENOMEM without any KASAN report. Fixes: c534320 ("nvme-fabrics: Add target support for FC transport") Cc: stable@vger.kernel.org Reviewed-by: Maurizio Lombardi <mlombard@redhat.com> Assisted-by: Codex:gpt-5 Signed-off-by: Jiang HongHui <jiang_hh2019@163.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 737a3b535247226f6e1a7988fd9d6e63e7d6fc71 upstream. When fuzzing the nvme target code, I tripped a kernel warning in nvmet_tcp_map_data() because the length passed into the allocator is controlled by the remote initiator. A remote initiator that sends a command with an SGL claiming a huge number, can create a scatterlist and iovec allocation of over 1 million entries, which causes the backing kmalloc call to exceed MAX_PAGE_ORDER and then the page allocator will trip on a WARN_ON_ONCE_GFP() message: WARNING: mm/page_alloc.c:5280 __alloc_frozen_pages_noprof Workqueue: nvmet_tcp_wq nvmet_tcp_io_work ... sgl_alloc_order nvmet_tcp_map_data nvmet_tcp_try_recv_pdu As it's never good to trip a kernel warning remotely due to many systems having panic-on-warn enabled, let's silence it by just add GFP_NOWARN to the allocation flags. Assisted-by: gkh_clanker_2000 Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cda4aa0 ] We already have snd_pcm_direction_name(). Let's use it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://patch.msgid.link/87mslzk51h.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org> Stable-dep-of: 17661c67b206 ("ASoC: SOF: ipc4-pcm: Continue the pipeline trigger in case of IPC timeout") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 169ec0a ] Move the sof_pcm_stream_free() from sof-audio.c to pcm.c as static function and add wrapper to free all active stream, which is going to be used in ipc3/4 topology code (removes duplicated code). With this change most of the PCM stream related code is located in one source file for easier lookup and simplified flow. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://patch.msgid.link/20250206092828.7569-2-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Stable-dep-of: 17661c67b206 ("ASoC: SOF: ipc4-pcm: Continue the pipeline trigger in case of IPC timeout") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
… open [ Upstream commit 4d2ea16 ] The platform specific pcm_open call via snd_sof_pcm_platform_open() can modify the initial buffer configuration via constraints. Move the prints as last step in the sof_pcm_open() function to reflect the final setup. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://patch.msgid.link/20250206092828.7569-3-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Stable-dep-of: 17661c67b206 ("ASoC: SOF: ipc4-pcm: Continue the pipeline trigger in case of IPC timeout") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…ev_err() [ Upstream commit 8606931 ] Introduce spcm_dbg() and spcm_err() macros to provide consistent printing for debug and error messages which includes usable information in the print's prefix. Update the prints in pcm.c, ipc3-pcm.c and ipc4-pcm.c to take advantage of the features provided by the macros. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://patch.msgid.link/20250206092828.7569-4-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Stable-dep-of: 17661c67b206 ("ASoC: SOF: ipc4-pcm: Continue the pipeline trigger in case of IPC timeout") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…eout [ Upstream commit 17661c67b206612cb3ba65d5ae726cd2015d0a53 ] Ignore IPC errors for pipeline state change if the firmware state is crashed or the IPC has timed out. If the firmware has crashed the kernel still needs to go through the state changes to reset its internal to be able to correctly work the next time the DSP is booted up. The case with IPC timeout is a bit more problematic, but it has been rootcaused to be the result of system scheduling blockage and the firmware did actually received and handled the message, but the reply handling got blocked by issues outside of the SOF stack. So far the best way to handle this is to continue with setting the state. Fixes: c40aad7 ("ASoC: SOF: ipc4-pcm: Workaround for crashed firmware on system suspend") Cc: stable@vger.kernel.org Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://patch.msgid.link/20260730112343.26687-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1ba381759e45d5d0442452cfa5c42e836191a568 ] The "DEC0 MODE" to "DEC7 MODE" controls are enumerated, but tx_macro_dec_mode_get() and tx_macro_dec_mode_put() access their value through ucontrol->value.integer.value[0] (a long) instead of ucontrol->value.enumerated.item[0] (an unsigned int). This same pattern was fixed in the sibling drivers by commit bcfe5f7 ("ASoC: codecs: rx-macro: fix accessing array out of bounds for enum type") and commit 0ea5eff ("ASoC: codecs: va-macro: fix accessing array out of bounds for enum type"), but tx-macro was missed. On 64-bit kernels built with CONFIG_SND_CTL_DEBUG, the elem value sanity check catches the 4 bytes written past the enumerated item and every read of these controls fails with -EINVAL: snd-sm8250 sound: control 2:0:0:DEC0 MODE:0: access overflow Fixes: c39667d ("ASoC: codecs: lpass-tx-macro: add support for lpass tx macro") Assisted-by: Claude:claude-fable-5 Cc: stable@vger.kernel.org Signed-off-by: Dawid Wróbel <me@dawidwrobel.com> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com> Link: https://patch.msgid.link/20260730-worktree-lpass-tx-macro-enum-fix-v2-1-6d091c736116@dawidwrobel.com Signed-off-by: Mark Brown <broonie@kernel.org> [ kept `snd_soc_kcontrol_component()` context line instead of upstream's renamed `snd_kcontrol_chip()` ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a7aad5b69d3bdaec20a3ed9284e184502450c0cd ] The timer callback reads entry->retrans_times outside pm.lock to decide whether to call mptcp_pm_subflow_established(). Since mptcp_pm_announced_del_timer() can concurrently set retrans_times = ADD_ADDR_RETRANS_MAX under pm.lock, a race condition exists. I discovered this issue while studying the code. AI tools helped me to verify the issue can potentially happen under race conditions. Use a local 'retransmit' flag set inside pm.lock to capture whether retransmission is still possible when the lock is taken. This allows to call mptcp_pm_subflow_established() accordingly, and not depending on the situation that can be different when checked outside the pm.lock. Fixes: 348d5c1 ("mptcp: move to next addr when timeout") Cc: stable@vger.kernel.org Signed-off-by: Qing Luo <luoqing@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260803-net-mptcp-misc-fixes-7-2-rc6-v2-4-b8f496d71664@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> [ applied to mptcp_pm_add_timer() in pm_netlink.c instead of pm.c and collapsed the adaptive backoff branch to `if (!retransmit) timeout = 0;` since the tree lacks exponential ADD_ADDR retransmission timeouts ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…SB-C commit a1556b48efc157fdda07b52ecc56c7bd1e1786f0 upstream. The Apple Magic Trackpad 2 (USB-C) reports a wildly wrong battery capacity over Bluetooth, for example a constant 4% for a pack that is actually at 74%. The device's battery input report (0x90) is laid out as [report-id][status][charge]. hid-input's synchronous capacity query, hidinput_query_battery_capacity(), assumes the common [report-id][capacity] layout and returns buf[1], which for this device is the status byte rather than the charge (buf[2]). magicmouse_fetch_battery(), which requests the battery report through hid_hw_request() so the reply is decoded via the report descriptor at the correct field offset, is gated to the USB models and never runs over Bluetooth. The device does not push battery reports on its own either, except a single one at connect time, which is delivered while probe holds driver_input_lock and is silently dropped. All userspace reads therefore go through the misparsing query, and the device is stuck reporting its status byte as the capacity. Enabling the fetch for Bluetooth is not sufficient on its own: user space reacts to the power_supply registration immediately, so a query is typically already in flight when the fetch reply is parsed. hidinput_get_battery_property() stores the query result and marks the battery as queried without rechecking whether a report arrived while it was waiting, clobbering the just-reported correct value with the misparsed one. Fix this by adding HID_BATTERY_QUIRK_AVOID_QUERY for the Bluetooth Magic Trackpad USB-C so the misparsing query path is never used, and by fetching the battery at the end of probe for this device. hidp has no asynchronous request() callback, so the fetch is serviced synchronously via __hid_request() while probe still holds driver_input_lock; call hid_device_io_start() first so the reply is processed instead of being discarded. Tested with a Magic Trackpad USB-C (004c:0324) over Bluetooth on 6.18.37: the reported capacity now matches the device (verified against a raw GET_REPORT of report 0x90) and updates on reconnect. Fixes: 87a2f10 ("HID: magicmouse: Apple Magic Trackpad 2 USB-C driver support") Cc: stable@vger.kernel.org Signed-off-by: Andrei Fed <andfed.net@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0af3b89705688af01aa06025b84fa7a1e06ba6cc upstream. magicmouse_input_mapping() caches the first hid_input's input_dev in msc->input while the report descriptor is parsed, and the rest of the driver treats a non-NULL msc->input as proof that an input device was registered. That does not hold on the hid-input error path. If hidinput_connect() fails -- for instance because input_register_device() returns an error -- it unwinds through hidinput_disconnect(), which frees every input_dev it created, including the one cached in msc->input. The failure does not abort the probe. hid_connect() only skips the claim: if ((connect_mask & HID_CONNECT_HIDINPUT) && !hidinput_connect(hdev, connect_mask & HID_CONNECT_HIDINPUT_FORCE)) hdev->claimed |= HID_CLAIMED_INPUT; and the "device has no listeners" bailout below it does not fire for this driver, which sets ->raw_event; on the USB Magic Mouse 2 / Magic Trackpad 2 paths hidraw and hiddev are claimed as well. hid_hw_start() therefore returns 0 and magicmouse_probe() continues with msc->input pointing at freed memory. Being non-NULL, it passes the "input not registered" check in probe and the NULL checks in ->raw_event and ->event, so the next input report dereferences freed memory. Clear msc->input when the HID core did not claim an input device, so the existing NULL checks cover this case as well. Fixes: f1a9a14 ("HID: magicmouse: fix race between input_register() and probe()") Link: https://lore.kernel.org/linux-input/20260728185542.65F091F000E9@smtp.kernel.org/ Cc: stable@vger.kernel.org Signed-off-by: Jose Villaseñor Montfort <pepemontfort@gmail.com> Reviewed-by: Alec Hall <signshop.alec@gmail.com> Tested-by: Alec Hall <signshop.alec@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…T_ID commit d93ba918a185aca2594da63e92fdc5495b559c0f upstream. It is currently possible for a malicious or misconfigured USB device to cause an out-of-bounds (OOB) read when submitting reports using DOUBLE_REPORT_ID by specifying a large report length and providing a smaller one. Let's prevent that by comparing the specified report length with the actual size of the data read in from userspace. If the actual data length ends up being smaller than specified, we'll politely warn the user and prevent any further processing. Signed-off-by: Lee Jones <lee@kernel.org> Reviewed-by: Günther Noack <gnoack@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a13cdb19fcb223ed41bdab3bab42b98dba87e90b upstream.
hid_set_field() hands field->usage + offset to hid_dump_input() before
the guard that bounds offset:
hid_dump_input(field->report->device, field->usage + offset, value);
if (offset >= field->report_count) {
hid_err(...);
return -1;
}
Under CONFIG_DEBUG_FS hid_dump_input() dereferences that pointer, with
buf = hid_resolv_usage(usage->hid, NULL). The usage[] array is
allocated inline with the hid_field in hid_register_field() and holds
field->maxusage entries, so an offset past it reads off the end of the
kvzalloc()ed allocation and into a neighbouring object. Had the guard
run first, offset < report_count <= maxusage would already have confined
the pointer to the array.
A caller supplies such an offset today. picolcd_fb_send_tile()
validates only report->maxfield before issuing
hid_set_field(report->field[0], 11 + i, ...) for i = 0..31, so its
offsets are fixed at 11..42 and are never checked against the bound
field. When the device registers that field with fewer usages, the
framebuffer deferred-io work drives the read on every tile. KASAN
reports a 4-byte slab-out-of-bounds read in hid_dump_input() below
hid_set_field(), and the same boot logs "offset (1) exceeds
report_count (1)" from the guard that runs only afterwards.
Move the hid_dump_input() call below the guard. Because
field->maxusage >= field->report_count, the guard then establishes that
field->usage + offset lies inside the array before it is dereferenced,
for every caller and without changing behaviour on the valid path.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>
Fixes: 1da177e ("Linux-2.6.12-rc2")
Reported-by: Federico Kirschbaum <federico.kirschbaum@xbow.com>
Reported-by: Baul Lee <baul.lee@xbow.com>
Cc: stable@vger.kernel.org
Signed-off-by: Baul Lee <baul.lee@xbow.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c283e9ada7fcb7dd4b10592623086b2e6d2f9925 ] xfrm_user_policy() clears the socket dst cache with __sk_dst_reset(), i.e. the non-atomic __sk_dst_set(sk, NULL): it reads sk_dst_cache with rcu_dereference_protected(), stores NULL and dst_release()s the old dst. That is only safe if no other thread modifies sk_dst_cache concurrently. For a connected UDP socket that does not hold: the transmit fast path (udp_sendmsg -> sk_dst_check -> sk_dst_reset) resets the cache locklessly with an atomic xchg(). A per-socket policy change racing a send can make both sides observe the same old dst and each dst_release() it, dropping the socket's single reference twice and freeing the xfrm_dst bundle while it is still referenced: BUG: KASAN: slab-use-after-free in dst_release Write of size 4 at addr ffff88801897b6c0 by task exploit/155 Call Trace: ... dst_release (... ./include/linux/rcuref.h:109) xfrm_user_policy (./include/net/sock.h:2239 ./include/net/sock.h:2256 net/xfrm/xfrm_state.c:3053) do_ip_setsockopt (net/ipv4/ip_sockglue.c:1347) ip_setsockopt (net/ipv4/ip_sockglue.c:1417) do_sock_setsockopt (net/socket.c:2368) __sys_setsockopt (net/socket.c:2393) __x64_sys_setsockopt (net/socket.c:2396) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Reachable by an unprivileged user via a user+network namespace. Use the atomic sk_dst_reset() so the cache is cleared and released with a single xchg(): whichever side wins releases the dst once, the other sees NULL and does nothing. Behaviour is otherwise unchanged. Fixes: 2b06cdf ("xfrm: Clear sk_dst_cache when applying per-socket policy.") Fixes: be8f828 ("net: xfrm: allow clearing socket xfrm policies.") Reported-by: AutonomousCodeSecurity@microsoft.com Signed-off-by: Xiang Mei (Microsoft) <xmei5@asu.edu> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cdc36db204ffd97b947d64374cf23a210dc74777 ]
hci_find_adv_instance() returns an adv_info pointer that is valid only
while hdev->lock is held. The advertising command-sync paths perform
instance lookups without that lock and, in some cases, retain the pointer
while waiting for a controller response.
An advertising termination event can therefore interleave as follows:
hci_cmd_sync_work hci_rx_work
hci_find_adv_instance()
__hci_cmd_sync_status()
wait for controller reply hci_dev_lock()
hci_remove_adv_instance()
kfree(adv)
adv->scan_rsp_changed = false
KASAN reported:
BUG: KASAN: slab-use-after-free in hci_set_ext_scan_rsp_data_sync+0x2e1/0x300
Write of size 1 at addr ffff88810a45d21d by task kworker/u17:0/88
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
hci_set_ext_scan_rsp_data_sync+0x2e1/0x300
hci_schedule_adv_instance_sync+0x390/0x4c0
hci_cmd_sync_work+0x173/0x300
Allocated by task 87:
hci_add_adv_instance+0x538/0xac0
add_advertising+0x885/0x1160
Freed by task 89:
kfree+0x131/0x3c0
hci_remove_adv_instance+0x1d8/0x3b0
hci_le_ext_adv_term_evt+0x17b/0x730
Protect the instance lookup and payload construction in the extended
advertising, scan response, and periodic advertising data paths. Snapshot
the advertising parameters under hdev->lock, but release the lock before
waiting for the controller.
Clear advertising-data dirty bits before issuing their commands and
restore them after a failure using a fresh lookup. Likewise, update the
reported transmit power through a fresh lookup after the parameter command
completes. No adv_info pointer then survives an HCI command wait.
Fixes: cba6b75 ("Bluetooth: hci_sync: Make use of hci_cmd_sync_queue set 2")
Cc: stable@vger.kernel.org
Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Signed-off-by: Chengfeng Ye <nicoyip.dev@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2aaf33c6e1e82561d7dce2345298a985a2483266 ] After commit 9cf6e24 ("Input: atkbd - do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETID"), HONOR FMB-P, aka HONOR MagicBook Pro 14 2025's internal keyboard stops working. Adding the atkbd_deactivate_fixup quirk fixes it. DMI: HONOR FMB-P/FMB-P-PCB, BIOS 1.13 05/08/2025 Fixes: 9cf6e24 ("Input: atkbd - do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETID") Reported-by: Mikura Kyouka <mikurakyouka@aosc.io> Reported-by: foad.elkhattabi <foad.elkhattabi@gmail.com> Signed-off-by: Cryolitia PukNgae <cryolitia.pukngae@linux.dev> Reviewed-by: Hans de Goede <hansg@kernel.org> Link: https://patch.msgid.link/20251022-honor-v1-1-ff894ed271a9@linux.dev Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Stable-dep-of: 410c44b10967 ("Input: atkbd - skip deactivate for HONOR ZQC-P") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 410c44b1096789d0c40fbee706520e981dba7bc1 ] The internal keyboard on the HONOR ZQC-P (HONOR MagicBook Pro 14 2026) does not work after boot. Using the kernel command line 'i8042.dumbkbd=1' makes the keyboard functional, but the CapsLock LED does not work. Adding the 'atkbd_deactivate_fixup' quirk fixes the keyboard and CapsLock LED natively without requiring boot parameters. DMI: HONOR ZQC-P/ZQC-P-PCB, BIOS 1.09 03/19/2026 Fixes: 9cf6e24 ("Input: atkbd - do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETID") Signed-off-by: Donglin Lyu <donglin_lyu@outlook.com> Tested-by: Ruslan Shevchenko <adefka@gmail.com> Link: https://patch.msgid.link/20260801151115.52709-1-donglin_lyu@outlook.com Cc: stable@vger.kernel.org [dtor: keep all HONOR entries together] Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit efc33b5102ff859bacd390a5f30112d8e0c084c0 ] mptcp_pm_destroy() empties msk->pm.anno_list and msk->pm.userspace_pm_local_addr_list under msk->pm.lock during socket teardown, dropping the lock between the two. A concurrent userspace PM genl ANNOUNCE on the same msk holds a sock reference via mptcp_token_get_sock() and, in mptcp_pm_nl_announce_doit(), calls mptcp_userspace_pm_append_new_local_addr() and mptcp_pm_announced_alloc(). Both take msk->pm.lock briefly to add to their respective lists. Because the genl handler holds a sock reference, mptcp_pm_destroy() may run on the same msk via mptcp_disconnect(), which invokes mptcp_destroy_common() without dropping the sock refcount, before the handler completes. If the lock acquisitions interleave such that mptcp_pm_destroy() empties a list first, the later alloc adds its entry to a list head that nothing else iterates for this msk, and the entry leaks. kmemleak reports both mptcp_pm_add_addr objects (from mptcp_pm_announced_alloc()) and mptcp_pm_addr_entry objects (from mptcp_userspace_pm_append_new_local_addr()) under sustained concurrent ANNOUNCE + close load against the userspace PM. Add an MPTCP_PM_DESTROYING bit in msk->pm.status, set by mptcp_pm_destroy() under pm.lock before the lists are emptied and checked under pm.lock by the alloc paths. Either the alloc takes pm.lock first, in which case its entry is on the list when mptcp_pm_destroy() frees it; or mptcp_pm_destroy() takes pm.lock first, in which case the later alloc observes the bit and refuses. Found by an MPTCP protocol-flow harness extending BRF (arXiv:2305.08782). Fixes: 9ab4807 ("mptcp: netlink: Add MPTCP_PM_CMD_ANNOUNCE") Cc: stable@vger.kernel.org Signed-off-by: Shardul Bankar <shardul.b@mpiricsoftware.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260803-net-mptcp-misc-fixes-7-2-rc6-v2-6-b8f496d71664@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> [ Inlined `mptcp_pm_destroy()` at its call site in `mptcp_destroy_common()` and moved the fences into the pre-rename `mptcp_pm_alloc_anno_list()`/`mptcp_free_local_addr_list()` equivalents, deleting the `mptcp_pm_is_userspace()` guard from inside the callee instead of the call site. ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 27b376b945c0aac46fcdfcc950b14a85b874b557 upstream. joycon_ctlr_read_handler() casts an incoming HID input report to struct joycon_input_report and parses it, guarding the cast only with a 12-byte length check: if (size >= 12) /* make sure it contains the input report */ joycon_parse_report(ctlr, (struct joycon_input_report *)data); struct joycon_input_report is 49 bytes: a 13-byte header followed by a union whose IMU arm is 36 bytes. For an IMU report joycon_parse_report() -> joycon_parse_imu_report() walks that union (struct offsets 13..48), so a report of exactly 12 bytes with data[0] == JC_INPUT_IMU_DATA passes the guard yet is read up to 37 bytes past its declared length. The over-read bytes are decoded into accelerometer/gyroscope values and forwarded to userspace through the "(IMU)" input device, leaking driver-internal memory. data[0] and size are fully controlled by a malicious or spoofed Joy-Con/Pro Controller. Receive buffers are sized to the maximum report length, so this is an over-read within the allocation rather than a slab OOB, but the decoded bytes still reach userspace. The sibling subcmd path in joycon_ctlr_handle_event() already bounds the same cast correctly: if (size < sizeof(struct joycon_input_report) || data[0] != JC_INPUT_SUBCMD_REPLY) break; Use the same sizeof(struct joycon_input_report) bound here. Fixes: 2af16c1 ("HID: nintendo: add nintendo switch controller driver") Cc: stable@vger.kernel.org Signed-off-by: Ibrahim Hashimov <security@auditcode.ai> Assisted-by: AuditCode-AI:2026.07 Reviewed-by: Silvan Jegen <s.jegen@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 28abce951343fcec26e397610868efa4e1395c3f upstream.
When fetch_item() is called by hid_scan_report() on an item with
HID_ITEM_TAG_LONG, it stores a pointer to the item data in
item->data.longdata instead of storing a value directly in
item->data.{u8/u16/u32}.
When item_udata() or item_sdata() encounters such an item, it incorrectly
assumes that the item is in short format, and therefore returns the lower
part of a kernel pointer reinterpreted as a number.
When a HID device is connected whose descriptor contains a
HID_GLOBAL_ITEM_TAG_REPORT_SIZE encoded in long format with size=4, this
causes the lower half of a kernel pointer to be printed into dmesg as a
number, like this:
hid (null): invalid report_size 107953555
To fix it, let item_udata() and item_sdata() verify that the item is in
short format.
Note that this bug only affects hid_scan_report(), while the main parsing
pass hid_parse_collections() will always bail out when encountering a long
item.
Sidenote: There are currently no users of data.longdata; maybe we should
just remove any parsing of long-format descriptors as a follow-up.
Fixes: 3dc8fc0 ("HID: Use hid_parser for pre-scanning the report descriptors")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ad8fb82b04422f49530d2aa2753cc81d1c60102c upstream. enable_sensor_store() can call set_power_report_state(), which dereferences sensor_inst->power_state and sensor_inst->report_state. These pointers refer to entries in sensor_inst->fields. Create the field attributes before exposing the enable_sensor sysfs attribute, so enable_sensor cannot be accessed before the state it depends on has been initialized. On remove, delete enable_sensor before freeing the field attributes, so a concurrent sysfs write cannot dereference freed memory through power_state or report_state. Reported-by: Sashiko AI Review <sashiko-bot@kernel.org> Link: https://sashiko.dev/#/patchset/20260623021950.1736413-1-haoxiang_li2024@163.com?part=1 Fixes: 4a7de05 ("HID: sensor: Custom and Generic sensor support") Cc: stable@vger.kernel.org Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 934b7778aa7b7c8f6bb073d2a73ba3674885bae0 upstream. The Hyper-V synthetic HID host supplies SYNTH_HID_INITIAL_DEVICE_INFO messages that contain a HID descriptor followed by the report descriptor bytes. mousevsc_on_receive_device_info() trusts bLength and wDescriptorLength without checking that the received packet contains both byte ranges. A malformed host or backend message can therefore make the guest read past the received VMBus packet while copying the report descriptor. Pass the received initial-device-info size into the parser and reject descriptor lengths that exceed the packet. Impact: A malicious Hyper-V host or backend can crash a guest by sending a short initial device-info message with an oversized HID report descriptor length. Fixes: b95f5bc ("HID: Move the hid-hyperv driver out of staging") Cc: stable@vger.kernel.org Assisted-by: Codex:gpt-5-5-xhigh Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 33af47e847fe4a28b109673affb5874015d54f5a upstream.
hci_cc_reset() clears the LE accept and resolving lists without taking
hdev->lock. Other command-complete handlers serialize updates to these
lists with that lock, and the debugfs readers hold it while walking them.
This permits the reset completion and a debugfs read to interleave as
follows:
hci_rx_work debugfs reader
----------- --------------
lock hdev->lock
fetch current entry
list_del(entry)
kfree(entry)
read entry fields
The reader then dereferences a freed list entry and may follow its stale
next pointer.
KASAN reported:
BUG: KASAN: slab-use-after-free in white_list_show+0x15f/0x180
Read of size 1 at addr ffff8881015dab16 by task poc/95
Call Trace:
white_list_show+0x15f/0x180
seq_read_iter+0x3ff/0x1190
seq_read+0x267/0x3d0
vfs_read+0x177/0xa20
ksys_read+0xf7/0x1c0
Allocated by task 91:
hci_bdaddr_list_add+0x1a6/0x3a0
hci_cc_le_add_to_accept_list+0xab/0x140
hci_cmd_complete_evt+0x26c/0x9a0
hci_event_packet+0x454/0xb20
hci_rx_work+0x293/0x730
Freed by task 90:
kfree+0x131/0x3c0
hci_bdaddr_list_clear+0xd8/0x160
hci_cc_reset+0x28a/0x370
hci_cmd_complete_evt+0x26c/0x9a0
hci_event_packet+0x454/0xb20
hci_rx_work+0x293/0x730
Take hdev->lock around both list clears. This matches the existing
mutation and traversal locking convention.
Fixes: a4d5504 ("Bluetooth: Clear LE white list when resetting controller")
Fixes: cfdb0c2 ("Bluetooth: Store Resolv list size")
Cc: stable@vger.kernel.org
Signed-off-by: Chengfeng Ye <nicoyip.dev@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0acd4eeb4b225b9bebbf9ef96cc10cdd79b94899 upstream. The Command Complete dispatch validates only the fixed part of the LE Set CIG Parameters response. After that part is pulled from the skb, hci_cc_le_set_cig_params() trusts num_handles and reads each entry in the trailing handle array. Matching num_handles against the command's num_cis does not guarantee that the response contains the advertised handles. A truncated response from a malfunctioning controller can therefore make the handler read beyond the skb data. Validate that the remaining skb data contains all advertised handles. Include this in the existing response validation so malformed responses also follow the established CIG failure handling. Fixes: 26afbd8 ("Bluetooth: Add initial implementation of CIS connections") Cc: stable@vger.kernel.org Signed-off-by: Laxman Acharya Padhya <acharyalaxman8848@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When GRO attempts to aggregate packets beyond GRO_LEGACY_MAX_SIZE (64KB), BIG TCP should only be permitted for plain IPv4 TCP and plain IPv6 TCP (with sufficient MAC header room to insert the temporary HBH jumbo header). However, commit b1a78b9 ("net: add support for ipv4 big tcp") loosened the check in skb_gro_receive(), leading to several issues: 1. skb_gro_receive() checked skb_headroom(p) instead of the actual space before the MAC header (p->mac_header). Because skb_headroom(p) includes mac_len, crafted frames (e.g. injected via AF_PACKET) can pass the check with p->mac_header < 8 bytes. When ipv6_gro_complete() inserts the temporary HBH jumbo header, the memmove() starts before skb->head, causing an out-of-bounds write and wrapping skb->mac_header. 2. It allowed non-IP protocols such as software VLAN (ETH_P_8021Q / ETH_P_8021AD) to aggregate beyond 64KB because p->protocol != ETH_P_IPV6 was true. 3. It checked p->encapsulation instead of NAPI_GRO_CB(skb)->encap_mark, allowing encapsulated flows (e.g. SIT / IPv6-in-IPv4) to aggregate beyond 64KB. Fix skb_gro_receive() to strictly enforce: - NAPI_GRO_CB(skb)->proto == IPPROTO_TCP - Not encapsulated (!NAPI_GRO_CB(skb)->encap_mark && !p->encapsulation) - Protocol must be either ETH_P_IP or ETH_P_IPV6 - If ETH_P_IPV6, p->mac_header must be at least sizeof(struct hop_jumbo_hdr) Returning -E2BIG from skb_gro_receive() ensures that packets which cannot become BIG TCP are cleanly flushed at <= 64KB and delivered intact without dropping. This issue does not exist in mainline (7.0+) because the subsystem was rewritten in commit 81be30c1f5f2 ("net/ipv6: Drop HBH for BIG TCP on RX side"), making this fix relevant only for older stable branches like 6.18.y. Fixes: 0fe79f2 ("net: allow gro_max_size to exceed 65536") Fixes: b1a78b9 ("net: add support for ipv4 big tcp") Reported-by: Sam Dlinn <sledge@meta.com> Cc: stable@vger.kernel.org Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20260825132541.813800447@linuxfoundation.org Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Ron Economos <re@w6rz.net> Tested-by: Wentao Guan <guanwentao@uniontech.com> Tested-by: Barry K. Nathan <barryn@pobox.com> Tested-by: Brett A C Sheffield <bacs@librecast.net> Tested-by: Miguel Ojeda <ojeda@kernel.org> Tested-by: Peter Schneider <pschneider1968@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d5dc1e69fd7258ea605c9952e5d5947539159ae3 upstream. A virtio_net_hdr (tun/tap, or AF_PACKET with PACKET_VNET_HDR) can mark an IPv4 or IPv6 fragment as GSO; nothing relates gso_type to frag_off. inet_frag_reasm_prepare()/inet_frag_reasm_finish() keep the first fragment's skb as the head of the reassembled datagram, including its shinfo->gso_size/gso_type/gso_segs, and chain the remaining fragments on frag_list with whatever linear/paged layout they arrived with. After ip_defrag() (ip_local_deliver(), nf_defrag_ipv4, ...) the reassembled skb therefore still claims to be GSO (SKB_GSO_DODGY), and the next software segmentation point - udp_rcv_segment() on local delivery, validate_xmit_skb(), or the ip_finish_output_gso() slow path - hands it to skb_segment(). skb_segment()'s frag_list walk assumes GRO-shaped input and hits one of its BUG_ON()s. Two writes to a tap by an unprivileged user in its own userns are enough: kernel BUG at net/core/skbuff.c:4899! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 1000 PID: 82 Comm: poc Not tainted 7.2.0-pentest+ #2 RIP: 0010:skb_segment+0x20ca/0x48b0 Call Trace: <TASK> __udp_gso_segment+0x29a/0x27d0 udp4_ufo_fragment+0x458/0x6c0 inet_gso_segment+0x429/0x1340 skb_mac_gso_segment+0x233/0x4f0 __skb_gso_segment+0x308/0x660 udp_queue_rcv_skb+0x440/0xad0 udp_unicast_rcv_skb+0xc7/0x2c0 udp_rcv+0x16ce/0x2260 ip_protocol_deliver_rcu+0x197/0x2d0 ip_local_deliver+0x430/0x690 ip_rcv+0x16f/0x1f0 __netif_receive_skb_one_core+0x15e/0x1c0 __netif_receive_skb+0x1e/0x110 netif_receive_skb+0xf6/0x5c0 tun_rx_batched.isra.0+0x3ab/0x790 tun_get_user+0x17c3/0x3550 tun_chr_write_iter+0xba/0x1b0 vfs_write+0x646/0x1130 </TASK> Kernel panic - not syncing: Fatal exception in interrupt This runs with BH disabled, so it is a panic rather than an oops. The same is reachable with CAP_NET_RAW in a netns where a defrag point precedes a GSO point, and from a guest whose VMM forwards virtio_net_hdr to a tap. The SKB_GSO_DODGY frag_list checks added by commit 3dcbdb1 ("net: gso: Fix skb_segment splat when splitting gso_size mangled skb having linear-headed frag_list") and by commit 9e4b7a9 ("net: gso: fix panic on frag_list with mixed head alloc types") do not cover it: page-backed heads skip them, and kmalloc heads skip them when gso_size == skb_headlen(head), which the sender controls. An skb entering a frag queue is an IP fragment by definition and cannot legitimately carry GSO state: GRO does not merge fragments and the stack segments before it fragments, so only untrusted sources are affected. This has been reachable since commit f43798c ("tun: Allow GSO using virtio_net_hdr"), the first path that let userspace attach GSO metadata to an IP fragment. Reset the GSO fields of every fragment as it is queued, in inet_frag_queue_insert(), which IPv4, IPv6, nf_conntrack_reasm and 6lowpan reassembly share; then neither the head nor the frag_list members of the reassembled skb carry them (the members matter too: the ip_do_fragment()/ip6_fragment() fast paths send them out as they are). The head may remain CHECKSUM_PARTIAL; that is already accepted on receive and resolved by skb_checksum_help() in ip_do_fragment()/ip6_fragment() on forward. Tested on top of net.git (dc4b95b8fee9), x86_64: the tap reproducer above, two further IPv4 frag_list geometries that reach BUG_ON(i >= nfrags) and BUG_ON(!list_skb->head_frag), and an IPv6 fragment-header variant (udp6_ufo_fragment()) each panic the unpatched kernel; with this patch all four datagrams are delivered intact and nothing is logged. Fixes: f43798c ("tun: Allow GSO using virtio_net_hdr") Cc: stable@kernel.org Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Xinyang Ge <xinyang@anthropic.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/937926e509f2acd8e0e66520dc2b30fd6b4d1687.1787839506.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
19 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Sync with upstream v6.6.155