arm64: dts: qcom: qcs6490-rb3gen2: Add LVDS display overlay - #1769
Conversation
|
Dev Completion validation failed CR: 4668551 The change task for this CR could not be moved to Dev Complete because of the error above. Please resolve the issue in Orbit and re-run the failed Orbit check. |
The QCS6490 RB3 Gen2 industrial mezzanine supports LVDS display output using the Lontium LT9211C DSI-to-LVDS bridge as an alternative to the default HDMI output via the LT9611UXC bridge. Add a DTBO overlay, qcs6490-rb3gen2-industrial-mezzanine-lvds-boe,dv215fhm-r01.dtso, that disables HDMI (hdmi-connector and lt9611_codec) and wires up the LT9211C bridge on I2C1 (address 0x29) with reset on GPIO117. The overlay adds a dual-channel panel-lvds node for the boe,dv215fhm-r01 panel, matched against the panel-simple-lvds-dual-ports binding which supplies the panel's size and timing internally. The overlay is built as a composite DTB combining the base qcs6490-rb3gen2.dtb, the industrial mezzanine overlay, and this LVDS overlay. Link: https://lore.kernel.org/all/20260905-lvds-support-v3-3-b40a1b03f63c@oss.qualcomm.com/ Signed-off-by: Vishnu Saini <vishnu.saini@oss.qualcomm.com>
e4f5b5f to
b122676
Compare
|
Dev Completion validation failed CR: 4668551 The change task for this CR could not be moved to Dev Complete because of the error above. Please resolve the issue in Orbit and re-run the failed Orbit check. |
d48e534
into
qualcomm-linux:tech/all/dt/qcs6490
|
Dev Completion validation failed CR: 4668551 The change task for this CR could not be moved to Dev Complete because of the error above. Please resolve the issue in Orbit and re-run the failed Orbit check. |
2 participants
Add QCS6490 industrial LVDS overlay
CRs-Fixed: 4668551