arm64: dts: qcom: monaco-evk: Add LVDS display overlay - #1770
Conversation
|
Dev Completion validation failed CR: 4668551 The change task for this CR could not be moved to Dev Complete because of the error above. Please resolve the issue in Orbit and re-run the failed Orbit check. |
The Monaco-EVK mezzanine supports LVDS display output using the Lontium LT9211C DSI-to-LVDS bridge. The bridge is connected to the DSI0 output and drives a dual-channel 1920x1080 LVDS panel in VESA-24 mapping. Add a DTBO overlay, monaco-evk-lvds-boe,dv215fhm-r01.dtso, that wires up the LT9211C bridge on I2C8 (address 0x2d) with reset on GPIO66, a panel-lvds node for the boe,dv215fhm-r01 panel (matched against the panel-simple-lvds-dual-ports binding, which supplies the panel's size and timing internally), and an LCD display bias regulator supplied through the GPIO expander. DSI power is provided by vreg_l5a. The overlay is built as a composite DTB combining the base monaco-evk.dtb, the IFP mezzanine overlay, and this LVDS overlay. Link: https://lore.kernel.org/all/20260905-lvds-support-v3-2-b40a1b03f63c@oss.qualcomm.com/ Signed-off-by: Vishnu Saini <vishnu.saini@oss.qualcomm.com>
e14be07 to
cb051a5
Compare
|
Dev Completion validation failed CR: 4668551 The change task for this CR could not be moved to Dev Complete because of the error above. Please resolve the issue in Orbit and re-run the failed Orbit check. |
17bfe7c
into
qualcomm-linux:tech/all/dt/qcs8300
|
Dev Completion validation failed CR: 4668551 The change task for this CR could not be moved to Dev Complete because of the error above. Please resolve the issue in Orbit and re-run the failed Orbit check. |
2 participants
Add monaco ifp mezz LVDS overlay
CRs-Fixed: 4668551