spidev

Library to Control Neopixel on Raspberry Pi 5 using python using hardware SPI ( GPIO 10) for high-performance, flicker-free NeoPixel (WS281x) control.

Python Library for driving MCP4922 DAC on Raspberry Pi

A Python module to interface addressable WS2812 (aka NeoPixel) LEDs via the SPIdev driver in Linux

A MCP3008 sensor driver in Rust.

analogue inputs on Raspberry Pi using MCP3208 and SPI

An automatic key management and locking system utilizing RFID tags for enhanced security.

Python API for USB-ISS Multifunction USB Communications Module

Python program for reading/writing data over the SPI interface from the ADIS 16490 sensor for Raspberry Pi. The spidev library is used.

Embedded PHP: GPIO and Protocols

Pure python driver library for ILI9341 SPI display using a variety of interfaces.

COEN/ELEC 390 Team Engineering Project

Object-oriented PHP bindings for the SPI protocol using the spidev linux kernel driver

Service to control multiple SK6812 RGBW LED strips over a webinterface

RPi.GPIO wrapper with mocks for developmennt on any platform

RFM69 Linux gateway

An open-source repository for a Raspberry Pi Python program of a project work, grounded in agricultural data analysis and centered around voice interactions.

Radio Frequency Identification

Modified device tree for the MYS-6ULX-IOT dev board based on the IMX6ULL to enable SPIDEV

tiny spi loopback test for the rpi

LibreElec with E-paper and IR control